100% Blackout Roller Blind Fabric Installation Process

The installation process of 100% Blackout Roller Blind Fabric :

1. Before installation, install the accessories and determine the direction of the head, which can be installed according to the preferences of the family. When installing, first determine the position, mark the position of the screw on the window frame, and then tighten the screw on the window frame with a screwdriver. Then open the module without the bead-making head, this module can be rotated.

2. Then install the roller blind in the window frame, and also determine the corresponding position, and mark the position of the head screw on the top. Use screws to fasten the heads on both sides to the top of the window frame, and lift the rotatable module at the same time.

3. Install the rail, determine the position, and then screw in the screws. Put the right end of the upper rail directly into the head with pull beads, and the left end to the head without pull beads. Then make sure the module is fastened, and there is no problem of loosening or movement, it means that it has been installed in place. Finally, we will gently pull the bead curtain down to see if it can rise.